Lompat ke isi

Suhu dan tekanan standar

Ensiklopedia Pengetahuan Universitas Islam Sultan Agung

Dalam kimia dan ilmu lainnya, istilah suhu dan tekanan standar (Inggris: standard temperature and pressure, disingkat STP) adalah sebuah keadaan standar yang digunakan dalam pengukuran eksperimen. Standar ini digunakan agar setiap data dalam percobaan yang berbeda-beda dapat dibandingkan. Standar yang paling umum digunakan adalah standar IUPAC dan NIST. Terdapat juga variasi standar lainnya yang ditetapkan oleh organisasi-organisasi lainnya. Standar IUPAC sekarang ini adalah suhu 0 °C (273,15 K, 32 °F) dan tekanan absolut 100 kPa (14,504 psi),[1] sedangkan standar NIST adalah 20 °C (293,15 K, 68 °F) dan tekanan absolut 101,325 kPa (14,696 psi).

Dalam bidang industri dan komersial, kondisi standar suhu dan tekanan bisanya perlu disebutkan untuk merujuk pada kondisi referensi standar untuk mengekspresikan volume gas dan cairan dan kuantitas lainnya. Walapun begitu, kebanyakan publikasi teknis hanya menyatakan "kondisi standar" tanpa penjelasan lebih lanjut, sehingga menimbulkan kerancuan dan kesalahan.

Definisi

Definisi lama

Dalam lima sampai enam dasarwasa terakhir, para profesional dan ilmuwan yang menggunakan sistem satuan metrik mendefinisikan kondisi referensi standar suhu dan tekanan untuk mengekspresikan volume gas sebagai 0 °C (273,15 K) dan 101,325 kPa (1 atm). Sedangkan untuk yang menggunakan saturan Imperial adalah 60 °F (520 °R) dan 14,696 psi (1 atm). Namun kedua definisi di atas tidak lagi digunakan.

Definisi baru

Terdapat beberapa definisi kondisi referensi standar yang sekarang digunakan oleh berbagai organisasi-organisasi di dunia. Beberapa organisasi mempunyai standar yang berbeda pada masa lalu, seperti IUPAC yang mempunyai standar 0 °C dan 100 kPa (1 bar) sejak 1982 dan berbeda dengan standar lama 0 °C dan 101,325 kPa (1 atm).[2] Contoh lainnya pada industri perminyakan, dengan standar lama 60 °F dan 14.696 psi, dan standar baru (terutama di Amerika Utara) 60 °F dan 14,73 psi.

Kondisi referensi standar
Suhu Tekanan mutlak Kelembapan relatif Organisasi
°C kPa % RH
0 100,000   IUPAC (definisi baru)[3]
0 101,325   IUPAC (definisi lama),[4] NIST,[5] ISO 10780[6]
15 101,325 0[7][8] ICAO's ISA,[9] ISO 13443,[10] EEA,[11] EGIA[12]
20 101,325   EPA,[13] NIST[14]
25 101,325   EPA[15]
25 100,000   SATP[16]
20 100,000 0 CAGI[17]
15 100,000   SPE[18]
°F psi % RH
60 14,696   SPE,[19] U.S. OSHA,[20] SCAQMD[21]
60 14,73   EGIA,[22] OPEC,[23] U.S. EIA[24]
59 14,503 78 U.S. Army Standard Metro[25][26]
59 14,696 60 ISO 2314, ISO 3977-2[27]
°F in Hg % RH
70 29,92 0 AMCA,[28][29] massa jenis udara = 0,075 lbm/ft³. Standar AMCA berlaku hanya untuk udara.

Notes:

  • EGIA: Electricity and Gas Inspection Act (of Canada)
  • SATP: Standard Ambient Pressure and Temperature
  • SCAQMD: California's South Coast Air Quality Management District

Pranala luar

Referensi

  1. ↑ A. D. McNaught, A. Wilkinson. Compendium of Chemical Terminology, The Gold Book. Blackwell Science. 1997. ISBN 0865426848.
  2. ↑ A. D. McNaught, A. Wilkinson. Compendium of Chemical Terminology, The Gold Book. Blackwell Science. 1997. ISBN 0865426848.
  3. ↑ A. D. McNaught, A. Wilkinson. Compendium of Chemical Terminology, The Gold Book. Blackwell Science. 1997. ISBN 0865426848.
  4. ↑ A. D. McNaught, A. Wilkinson. Compendium of Chemical Terminology, The Gold Book. Blackwell Science. 1997. ISBN 0865426848.
  5. ↑ NIST. NIST Standard Reference Database 7 – NIST Electron and Positron Stopping Powers of Materials Database. 1989.
  6. ↑ ISO. ISO 10780:1994 : Stationary source emissions - Measurement of velocity and volume flowrate of gas streams in ducts. 1994.
  7. ↑ Robert C. Weast (Editor). Handbook of Physics and Chemistry. CRC Press. 1975. hlm. pp. F201-F206.
  8. ↑ "Natural gas – Standard reference conditions", ISO 13443, International Organization for Standardization, Geneva, Switzerland ISO Standards Catalogue
  9. ↑ Robert C. Weast (Editor). Handbook of Physics and Chemistry. CRC Press. 1975. hlm. pp. F201-F206.
  10. ↑ "Natural gas – Standard reference conditions", ISO 13443, International Organization for Standardization, Geneva, Switzerland ISO Standards Catalogue
  11. ↑ "Extraction, First Treatment and Loading of Liquid & Gaseous Fossil Fuels", Emission Inventory Guidebook B521, Activities 050201 - 050303, September 1999, European Environmental Agency, Copenhagen, Denmark Emission Inventory Guidebook
  12. ↑ "Electricity and Gas Inspection Act", SOR/86-131 (defines a set of standard conditions for Imperial units and a different set for metric units) Canadian Laws
  13. ↑ "Standards of Performance for New Sources", 40 CFR--Protection of the Environment, Chapter I, Part 60, Section 60.2, 1990 New Source Performance Standards
  14. ↑ "Design and Uncertainty for a PVTt Gas Flow Standard", Journal of Research of the National Institute of Standards and Technology, Vol.108, Number 1, 2003 NIST Journal
  15. ↑ "National Primary and Secondary Ambient Air Quality Standards", 40 CFR--Protection of the Environment, Chapter I, Part 50, Section 50.3, 1998 National Ambient Air Standards
  16. ↑ "Table of Chemical Thermodynamic Properties", National Bureau of Standards (NBS), Journal of Physics and Chemical Reference Data, 1982, Vol. 11, Supplement 2.
  17. ↑ "Glossary", 2002, Compressed Air and Gas Institute, Cleveland, OH, USA Glossary
  18. ↑ The SI Metric System of Units and SPE Metric Standard 1984, Richardson, TX, USA (Notes for Table 2.3 on page 25 define standard cubic foot and standard cubic meter)
  19. ↑ The SI Metric System of Units and SPE Metric Standard 1984, Richardson, TX, USA (Notes for Table 2.3 on page 25 define standard cubic foot and standard cubic meter)
  20. ↑ "Storage and Handling of Liquefied Petroleum Gases" and "Storage and Handling of Anhydrous Ammonia", 29 CFR--Labor, Chapter XVII--Occupational Safety and Health Administration, Part 1910, Sect. 1910.110 and 1910.111, 1993 Storage/Handling of LPG
  21. ↑ "Rule 102, Definition of Terms (Standard Conditions)", Amended December 2004, South Coast Air Quality Management District, Los Angeles, California, USA SCAQMD Rule 102
  22. ↑ "Electricity and Gas Inspection Act", SOR/86-131 (defines a set of standard conditions for Imperial units and a different set for metric units) Canadian Laws
  23. ↑ "Annual Statistical Bulletin", 2004, Editor-in-chief: Dr. Omar Ibrahim, Organization of the Petroleum Exporting Countries, Vienna, Austria OPEC Statistical Bulletin
  24. ↑ "Natural Gas Annual 2004", DOE/EIA-0131(04), December 2005, U.S. Department of Energy, Energy Information Administration, Washington, D.C., USA Natural Gas Annual 2004
  25. ↑ Sierra Bullets L.P. Rifle and Handgun Reloading Manual, 5th Edition."Effects of Altitude and Atmospheric Conditions", Exterior Ballistics Section, Sierra's "Rifle and Handgun Reloading Manual, 5th Edition", Sedalia, MO, USA Exterior Ballistics
  26. ↑ The pressure is specified as 750 mmHg. However, the mmHg is temperature dependant, as mercury expands as temperature goes up. Here the values for the 0-20 °C range are given.
  27. ↑ "Gas turbines – Procurement – Part 2: Standard reference conditions and ratings", ISO 3977-2:1997 and "Gas turbines - Acceptance tests", ISO 2314:1989, Edition 2, International Organization for Standardization, Geneva, Switzerland ISO
  28. ↑ ANSI/AMCA Standard 210, "Laboratory Methods Of Testing Fans for Aerodynamic Performance Rating", as implied here: http://www.greenheck.com/pdf/centrifugal/Plug.pdf when accessed on October 17, 2007
  29. ↑ The standard is given as 29.92 inHg at an unspecified temperature. This most likely corresponds to a standard pressure of 101.325 kPa, converted into ~29.921 inHg at 32 °F)

Sumber dan atribusi

Konten artikel ini diadaptasi dari Wikipedia bahasa Indonesia, revisi 29494270 (2026-07-25T18:04:55Z), yang tersedia berdasarkan lisensi Creative Commons Atribusi-BerbagiSerupa (CC BY-SA). Mohon gunakan konten ini secara bijak serta sesuai dengan ketentuan lisensi yang berlaku.


Diperoleh dari "https://wiki.unissula.ac.id/index.php?title=Suhu_dan_tekanan_standar&oldid=13763"